2-pump Load-Sensing Hydraulic System Kubota’s load-sensing hydraulic system ensures smoother operation, regardless of load size. It allows hydraulic oil to flow according to the specific range of the operator’s lever motion. As a result, it reduces fuel consumption and delivers greater overall operating performance. A new 2-pump L/S system improves the overall smoothness of operations when moving the front attachments simultaneously, moving front attachments while travelling, and operating special attachments that are independently powered – such as a brush cutter. Auto Idling System Kubota’s Auto Idling System is fitted as standard. When the control levers are left in neutral for longer than 4 seconds, the
idling system automatically reduces the engine to idling RPM. When the levers are moved again, engine RPM is immediately reset to the dial-set RPM. This innovative feature reduces noise and exhaust emissions, in addition to saving energy and running costs. Dozer Blade with Float Function You don’t need to adjust the dozer height to make a clean ground surface after backfilling, just travel backward along the covered ditch with the dozer in the float position. Ground finishing work is now fast and easy!
Kubota Original DI Engine with CRS and DPF Muffler Equipped with CRS and DPF, Kubota’s V3307 direct-injection engine is now fully Stage-V compliant. The new and improved DPF reduces maintenance by increasing the service
Injector
intervals for both the regeneration filter and ash cleaner.
ECU
Sensor
Common Rail
Supply pump
1
Injector
ECU
Sensor
Common Rail
Supply pump
1. Adjustable Maximum Oil Flow on Auxiliary Circuit (AUX1/AUX2) Two proportional control auxiliary circuits (AUX1/AUX2) come as standard on the KX080-4 α 2. The convenient switch on the left and right lever allows simple and accurate yet minute operation for a wide variety of attachments. The maximum oil flow settings of both circuits are conveniently adjustable from the drivers seat via the digital display panel – no additional tools or complex manual adjusting procedures are necessary. You can programme up to five oil flow rates corresponding to specific attachments into the memory of the digital display panel. Programmed settings can be quickly retrieved for the required job. The system comes with nine pre-installed attachment icons.
Auto Shift The KX080-4 α 2 is fitted with an advanced two-speed auto-shift feature, which automatically adjusts speed and traction force depending on load size and terrain to enhance travel performance and ensure smooth and easy operation.
Powered by FlippingBook