2-PIECE BOOM VERSION
SPECIFICATIONS
WORKING RANGE
*with rubber shoe, JPN bucket and 2100 mm arm
kg m 3 kg
9145 9070 0.25/0.21
Operating weight* 2 Machine weight* 1
Bucket capacity, std. SAE/CECE Bucket width With side teeth Without side teeth Model
mm mm
800 700 V3307-CR-TE5-BH-1 Water-cooled, diesel engine E-CDIS (with CRS and DPF)
1500
1500
2420/2230
Type
2420/2230
63.2/2000 46.5/2000 4 94 × 120 3331 9.8 450 2300 2200 × 500
PS/rpm kW/rpm
Engine
Output ISO9249 NET
Number of cylinders Bore × Stroke Displacement
mm cc rpm mm mm mm
Swivelling speed Rubber shoe width
Tumbler distance Dozer size (width × height)
Variable displacement pump
P1,P2 Flow rate Hydraulic pressure Arm Bucket
Hydraulic pumps
84.6 × 2 27.4 (280) 38.1 (3880) 65.2 (6650) 67/60 1990/2310 100 20.6 (210) 55.8 20.6 (210) 75 115 2.7 4.8 39.7 (0.405) 356 75 / 96 <2.5 / <2.5 4.40 / <2.5 <0.5 / <0.5 0.879 / <0.5
/min
1500
Max. digging force Boom swing angle (left/right) MPa (kgf/cm 2 ) kN (kgf) kN (kgf) deg Minimum front swivel radius with boom swing (left/right)
2420/2230
/min
Max. flow rate Max. hydraulic pressure
Auxiliary circuit (AUX1) Auxiliary circuit (AUX2)
MPa (kgf/cm 2 )
Max. flow rate Max. hydraulic pressure MPa (kgf/cm 2 ) /min
5440/5430 6940/6930
1500
5440/5430 6940/6930
1500
Hydraulic reservoir Fuel tank capacity Max. travelling speed Ground contact pressure Ground clearance Low High
km/h km/h kPa (kgf/cm 2 ) mm
1500 Unit:mm 2100 mm arm 1750 mm arm
Noise level
LpA / LwA (2000/14/EC)
dB (A) m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS
5440/5430 6940/6930
Digging / Levelling Driving / Idling Digging / Levelling Driving / Idling
Hand arm system (ISO 5349-2:2001) Whole body (ISO 2631-1:1997)
7670/7330 7820/7490
7670/7330 7820/7490
Vibration* 3
* 1 With 176.6 kg standard bucket and fully served * 2 With 75 kg operator, 176.6 kg standard bucket and fully served * 3 These values are measured under specific conditions at maximum engine speed and can deviate, depending on the operating status.
7670/7330 7820/7490
Lift Point
Lift Point Radius
Lift Point
Lift Point Radius
LIFTING CAPACITY
Lift Point
Lift Point Radius
kN (ton)
Lifting point radius (Min) Over-front
Lifting point radius (4m) Over-front
Lifting point radius (5m) Over-front
Lifting point radius (Max) Over-front
Lift Point Height
Over-side
Over-side
Over-side
Over-side
Lift Point Height Blade Down Blade Up
Blade Down 23.0 (2.35)
Blade Up 23.0 (2.35)
Blade Down 19.6 (2.00) 18.1 (1.85) 23.5 (2.40) 22.1 (2.25) 27.4 (2.80) 26.5 (2.70) 27.4 (2.80) 27.0 (2.75) 26.0 (2.65) 26.5 (2.70) 22.5 (2.30) 24.0 (2.45) 6.9 (0.70) 11.3 (1.15)
Blade Up 19.6 (2.00) 18.1 (1.85) 21.1 (2.15) 21.6 (2.20) 19.1 (1.95) 19.1 (1.95) 18.6 (1.90) 18.6 (1.90) 18.1 (1.85) 18.1 (1.85) 18.1 (1.85) 18.1 (1.85) 6.9 (0.70) 11.3 (1.15)
Blade Down 17.6 (1.80) 16.7 (1.70) 18.6 (1.90) 18.1 (1.85) 20.1 (2.05) 20.1 (2.05) 20.6 (2.10) 20.1 (2.05) 19.6 (2.00) 20.1 (2.05) 17.2 (1.75) 18.1 (1.85)
Blade Up 15.2 (1.55) 15.7 (1.60) 14.7 (1.50) 14.7 (1.50) 13.7 (1.40) 13.7 (1.40) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30)
Lift Point Height
1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm
23.0 (2.35)
17.2 (1.75) 17.6 (1.80) 15.7 (1.60) 16.2 (1.65) 14.2 (1.45) 14.2 (1.45) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 6.9 (0.70) 11.3 (1.15)
11.8 (1.20) 12.3 (1.25) 11.3 (1.15) 11.3 (1.15) 10.3 (1.05) 10.3 (1.05) 10.3 (1.05) 10.3 (1.05) 9.8 (1.00) 9.8 (1.00) 9.8 (1.00) 9.3 (0.95)
5m
Lift Point Height
3m
14.7 (1.50) 13.8 (1.41)
9.6 (0.98) 9.5 (0.97)
7.3 (0.74) 6.9 (0.71)
Axis of Rotation
1.5m
Axis of Rotation
Axis of Rotation
1m
* Working ranges are with Kubota standard bucket, without quick coupler. * Specifications are subject to change without notice for purpose of improvement.
0m
LONG-ARM_2pieces_S
27.9 (2.85) 22.5 (2.30)
27.9 (2.85) 22.5 (2.30)
20.6 (2.10) 22.5 (2.30)
-1m
LONG-ARM_2pieces_Sa LONG-ARM_2pieces_Sad
-3m
Please note: * The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87% of the hydraulic lifting capacity of the machine. * The excavator bucket, hook, sling and other lifting accessories are not included on this table.
Fluorinated greenhouse gases Air conditioner gas contains fluorinated greenhouse gases.
Industrial designation HFC-134a
Quantity (kg) 0.98
CO 2 equivalent (ton) 1.41
CAB model KX080-4 α 2
GWP 1430
(Global Warming Potential: GWP)
★ All images shown are for brochure purposes only. When operating the excavator, wear clothing and equipment in accordance to local legal and safety regulations.
Powered by FlippingBook