SPECIFICATIONS
WORKING RANGE
*with rubber shoe, JPN bucket and 2100 mm arm
8440 8365 0.25/0.21
kg m 3 kg
Operating weight* 2 Machine weight* 1
Bucket capacity, std. SAE/CECE Bucket width With side teeth Without side teeth Model
800 700 V3307-CR-TE5-BH-1 Water-cooled, diesel engine E-CDIS (with CRS and DPF)
mm mm
1460
1460
Type
63.2/2000 46.5/2000 4 94 × 120 3331 9.8 450 2300 2200 × 500
PS/rpm kW/rpm
2490/2410
Engine
Output ISO9249 NET
2490/2410
Number of cylinders Bore × Stroke Displacement
mm cc rpm mm mm mm
Swivelling speed Rubber shoe width
Tumbler distance Dozer size (width × height)
Variable displacement pump
P1,P2 Flow rate Hydraulic pressure Arm Bucket
Hydraulic pumps
84.6 × 2 27.4 (280) 38.1 (3880) 65.2 (6650) 67/60 2050/2380 100 20.6 (210) 55.8 20.6 (210) 75 115 2.7 4.8 36.6 (0.373) 356 75 / 96 <2.5 / <2.5 4.40 / <2.5 <0.5 / <0.5 0.879 / <0.5
/min
Max. digging force Boom swing angle (left/right) MPa (kgf/cm 2 ) kN (kgf) kN (kgf) deg Minimum front swivel radius with boom swing (left/right)
1460
/min
Max. Flow rate Max. Hydraulic pressure
Auxiliary circuit (AUX1) Auxiliary circuit (AUX2)
2490/2410
MPa (kgf/cm 2 )
1460
4990/4950 6450/6410
Max. Flow rate Max. Hydraulic pressure MPa (kgf/cm 2 ) /min
1460
4990/4950 6450/6410
Hydraulic reservoir Fuel tank capacity Max. travelling speed Ground contact pressure Ground clearance Noise level Low High
km/h km/h kPa (kgf/cm 2 ) mm dB (A)
7170/6840 7330/7010
LpA / LwA (2000/14/EC)
1460 Unit:mm 2100 mm arm 1750 mm arm
7170/6840 7330/7010
m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS
Digging / Levelling Driving / Idling Digging / Levelling Driving / Idling
Hand arm system (ISO 5349-2:2001) Whole body (ISO 2631-1:1997)
4990/4950 6450/6410
Vibration* 3
Lift Point Radius
Lift Point
Lift Point Radius
* 1 With 176.6 kg standard bucket and fully served * 2 With 75 kg operator, 176.6 kg standard bucket and fully served * 3 These values are measured under specific conditions at maximum engine speed and can deviate, depending on the operating status.
Lift Point
7170/6840 7330/7010
LIFTING CAPACITY
Lift Point Height
Lift Point Height
kN (ton)
Lift Point Radius *With counter weight
Lift Point
Lifting point radius (Min) Over-front Blade Up
Lifting point radius (4m) Over-front Blade Up
Lifting point radius (5m) Over-front Blade Up
Lifting point radius (Max) Over-front Blade Up
Lift Point Height
Over-side
Over-side
Over-side
Over-side
Blade Down
Blade Down 16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 26.0 (2.65) 24.5 (2.50) 27.4 (2.80) 26.0 (2.65) 28.4 (2.90) 27.9 (2.85) 27.0 (2.75) 27.4 (2.80)
Blade Down
Blade Down
1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm
16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 18.6 (1.90) 18.6 (1.90) 18.1 (1.85) 18.1 (1.85) 17.6 (1.80) 17.6 (1.80) 17.2 (1.75) 17.2 (1.75)
16.2 (1.65) 14.2 (1.45) 15.2 (1.55) 15.7 (1.60) 13.7 (1.40) 14.2 (1.45) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30) 12.7 (1.30)
Axis of Rotation
5m
Axis of Rotation
Lift Point Height
17.2 (1.75) 16.2 (1.65) 20.1 (2.05) 19.1 (1.95) 20.6 (2.10) 20.1 (2.05) 21.1 (2.15) 21.1 (2.15) 20.1 (2.05) 20.6 (2.10)
13.7 (1.40) 14.2 (1.45) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30) 13.2 (1.35) 12.7 (1.30) 12.7 (1.30) 12.7 (1.30) 12.3 (1.25)
10.8 (1.10) 10.8 (1.10) 10.3 (1.05) 10.3 (1.05) 9.8 (1.00) 9.8 (1.00) 9.3 (0.95) 9.3 (0.95) 9.3 (0.95) 9.3 (0.95)
3m
17.0 (1.74) 15.8 (1.61)
10.7 (1.09) 9.3 (0.95)
8.2 (0.84) 7.5 (0.76)
1.5m
Axis of Rotation
1m
* Working ranges are with Kubota standard bucket, without quick coupler. * Specifications are subject to change without notice for purpose of improvement.
0m
37.2 (3.80) 28.4 (2.90)
37.2 (3.80) 28.4 (2.90)
37.2 (3.80) 28.4 (2.90)
-1m
LONG-ARM_S LONG-ARM_Sa LONG-ARM_
-3m
15.7 (1.60)
15.7 (1.60)
13.2 (1.35)
Lifting point radius (Min) Over-front Blade Up *Light weight version Please note: * The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87% of the hydraulic lifting capacity of the machine. * The excavator bucket, hook, sling and other lifting accessories are not included on this table. Over-side Blade Down Lifting point radius (4m) Over-front Blade Up Over-side Lifting point radius (5m) Over-front Blade Up Blade Down Lift Point Height
Lifting point radius (Max) Over-front Blade Up
Over-side
Over-side
Blade Down 16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 26.0 (2.65) 24.5 (2.50) 27.4 (2.80) 26.0 (2.65) 28.4 (2.90) 27.9 (2.85) 27.0 (2.75) 27.4 (2.80)
Blade Down
1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm
16.7 (1.70) 14.2 (1.45) 18.1 (1.85) 18.1 (1.85) 16.7 (1.70) 17.2 (1.75) 16.2 (1.65) 16.7 (1.70) 15.7 (1.60) 15.7 (1.60) 15.7 (1.60) 15.7 (1.60)
14.7 (1.50) 14.2 (1.45) 13.7 (1.40) 14.2 (1.45) 12.7 (1.30) 12.7 (1.30) 12.3 (1.25) 12.3 (1.25) 11.8 (1.20) 11.8 (1.20) 11.3 (1.15) 11.3 (1.15)
5m
17.2 (1.75) 16.2 (1.65) 20.1 (2.05) 19.1 (1.95) 20.6 (2.10) 20.1 (2.05) 21.1 (2.15) 21.1 (2.15) 20.1 (2.05) 20.6 (2.10)
12.7 (1.30) 12.7 (1.30) 11.8 (1.20) 12.3 (1.25) 11.8 (1.20) 11.8 (1.20) 11.3 (1.15) 11.3 (1.15) 11.3 (1.15) 11.3 (1.15)
9.8 (1.00) 9.8 (1.00) 8.8 (0.90) 9.3 (0.95) 8.8 (0.90) 8.8 (0.90) 8.3 (0.85) 8.3 (0.85) 8.3 (0.85) 8.3 (0.85)
3m
17.1 (1.74) 15.8 (1.61)
9.8 (1.00) 8.4 (0.86)
7.4 (0.75) 6.5 (0.67)
1.5m
1m
0m
37.2 (3.80) 28.4 (2.90)
37.2 (3.80) 28.4 (2.90)
35.8 (3.65) 28.4 (2.90)
-1m
-3m
15.7 (1.60)
15.7 (1.60)
11.8 (1.20)
Powered by FlippingBook