KX080-4a2 - UK PRODUCT BROCHURE

Engine output: 63.2 PS / 46.5 kW Machine weight: 8,365 kg

KUBOTA EXCAVATOR

Performance that is powerful yet clean, a design that is bold yet practical. It starts with a rugged and reliable direct- injection Kubota engine with CRS and a DPF muffler. A new 2-pump load sensing system improves the overall smoothness of operations when using the front attachments. The KX080-4 α 2 also offers a variety of other improvements that enhance convenience and boost performance and productivity for a wide range of jobs.

2-pump Load-Sensing Hydraulic System Kubota’s load-sensing hydraulic system ensures smoother operation, regardless of load size. It allows hydraulic oil to flow according to the specific range of the operator’s lever motion. As a result, it reduces fuel consumption and delivers greater overall operating performance. A new 2-pump L/S system improves the overall smoothness of operations when moving the front attachments simultaneously, moving front attachments while travelling, and operating special attachments that are independently powered – such as a brush cutter. Auto Idling System Kubota’s Auto Idling System is fitted as standard. When the control levers are left in neutral for longer than 4 seconds, the

idling system automatically reduces the engine to idling RPM. When the levers are moved again, engine RPM is immediately reset to the dial-set RPM. This innovative feature reduces noise and exhaust emissions, in addition to saving energy and running costs. Dozer Blade with Float Function You don’t need to adjust the dozer height to make a clean ground surface after backfilling, just travel backward along the covered ditch with the dozer in the float position. Ground finishing work is now fast and easy!

Kubota Original DI Engine with CRS and DPF Muffler Equipped with CRS and DPF, Kubota’s V3307 direct-injection engine is now fully Stage-V compliant. The new and improved DPF reduces maintenance by increasing the service

Injector

intervals for both the regeneration filter and ash cleaner.

ECU

Sensor

Common Rail

Supply pump

Injector

ECU

Sensor

Common Rail

Supply pump

1. Adjustable Maximum Oil Flow on Auxiliary Circuit (AUX1/AUX2) Two proportional control auxiliary circuits (AUX1/AUX2) come as standard on the KX080-4 α 2. The convenient switch on the left and right lever allows simple and accurate yet minute operation for a wide variety of attachments. The maximum oil flow settings of both circuits are conveniently adjustable from the drivers seat via the digital display panel – no additional tools or complex manual adjusting procedures are necessary. You can programme up to five oil flow rates corresponding to specific attachments into the memory of the digital display panel. Programmed settings can be quickly retrieved for the required job. The system comes with nine pre-installed attachment icons.

Auto Shift The KX080-4 α 2 is fitted with an advanced two-speed auto-shift feature, which automatically adjusts speed and traction force depending on load size and terrain to enhance travel performance and ensure smooth and easy operation.

Spacious & Comfortable

On the KX080-4 α 2, your comfort truly comes first. The luxurious cabin features a wide entrance, generous legroom and a deluxe seat. The Roll-over Protective Structure (ROPS, ISO 12117-2) and Operator Protective Guard (OPG, Top Guard Level I , ISO 10262 as standard, level II as an option with Top Guard) maximise safety. Operation is greatly enhanced with more easy-to-use features than ever before.

Air Conditioner A powerful cooling/heating system and six vents provide optimum comfort on the coldest winter and hottest summer days.

Deluxe Suspension Seat Designed and engineered with comfort in mind, Kubota’s high-back suspension seat reduces strain and minimises operator fatigue. It reclines to accommodate your individual posture, and offers weight compensation, firm wrist support and retractable seat belt.

3. Front Window Guard / Top Guard (Level II as optional) Operators who require additional protection from flying chips and debris when using some attachments or when antivandalism is important. Kubota provides the window guard mounting points around the front window as a standard feature. LH Control Lever Console Raise the safety control lever and the console moves up with it, providing more room for entry and exit. To prevent unexpected machine movement during entry or exit, all control levers are then disabled until the console is back in place.

1. Digital Display Panel Informative, interactive and functional, Kubota’s Intelligent Control System LCD panel accurately displays timely diagnostic readings and routine maintenance alerts. Information such as engine RPM, engine temperature, fuel level, machine hours and a 90 day usage register with recorded machine hours for each day the machine is worked are also displayed. 2. Easy-open Front Window

Unlike many excavator windows, the front window of the KX080-4 α 2 opens with ease. Just flip the latches on both sides of the window and slide it up. A gas-assist mechanism makes this action almost effortless.

ROPS/OPG (Top Guard Level I , ISO 10262) Cabin as standard Kubota has adopted a cabin that is certified as a Roll-over Protection Structure (ROPS, ISO 12117-2) and an Operator Protective Guard (OPG Top Guard Level I , ISO 10262) as standard. OPG front guard, Top Guard Level II is optional.

Advanced Visibility Mirrors The big rear-view mirror offers a wide range of visibility. Together with the two side-view mirrors, you get a better view of your worksite, as well as your immediate surroundings.

Cup Holder With the convenience of a bigger cup holder, you can quench your thirst and work longer without leaving the cab. Or store your cell phone, with a 12 V charging port located conveniently close by.

Dependability & Protection

Kubota goes the extra mile to simplify inspections and maintenance for the KX080-4 α 2. Vital components, battery, fluid tanks and filters are now easier to access than ever. And the Automatic Regeneration System keeps the DPF muffler clean to keep the KX080-4 α 2 going for years ahead.

Conveniently located toolbox

Strong and secure tie downs

New rear bonnet and counterweight design

Triple Opening Bonnet All three of the excavator’s access panels can open at once. This allows you to easily inspect and view the centrally located components of the KX080-4 α 2. You can easily access the hydraulic components under the centre bonnet, or the battery, oil filter and toolbox and grease gun space under the right bonnet. Maintaining your excavator has never been so easy. A. Dual Element Air Cleaner B. DPF Muffler

Automatic Regeneration System Kubota’s original automatic regeneration system automatically burns accumulated particulate matter (soot) in the DPF muffler to keep the muffler clean for longer operation. For safety reasons, automatic regeneration can be turned off with the inhibit switch when the excavator is operating in areas that are prone to fires. The current DPF regeneration condition is displayed on the digital display panel so you can focus on your job.

E. Starter Motor F. Control Valves G. Hydraulic Return Oil Filter

H. Battery I. Large Water Separator J. Grease Gun Space

C. Fuel Filter D. Alternator

4. Safety (Anti-drop) Valve on the Boom & Arm The KX080-4 α 2 is fitted with a boom and arm-lowering control device as standard. 5. Double Structure Stainless Exhaust Gas Pipe The double structure exhaust gas pipe helps to reduce the increases in exhaust gas temperatures caused by the DPF automatic regeneration process to minimise the risk of danger to people nearby and the environment. Furthermore, to prevent rust it is now made of stainless steel. Variable Speed Fan The variable speed fan drive provides the right amount of cooling efficiency by regulating the engine fan speed according to the ambient temperature after the air passes through the radiator. The benefits are reduced fan noise and fuel savings through effective use of engine output.

1. 2. Easy Maintenance Parts that require routine maintenance and inspection such as the engine oil level and V-belt are easy to access. In addition, all filters are located near the bonnet opening to simplify their replacement.

C. Oil Gauge D. Radiator Cooler Tank

A. Engine Oil Dipstick B. Engine Fan Belt

3. Tank Electric Refuelling Pump The KX080-4 α 2’s standard diesel refueling pump includes an auto-stop function that minimizes spillage and increases safety. Filing from empty takes approximately three minutes.

Two-Piece Hose Design Kubota’s innovative two-piece hose design for the dozer blade reduces hose replacement time by nearly 60% compared to one piece hose. This design virtually eliminates the need to enter the machine for maintenance.

Tight Tail Swing The KX080-4 α 2 is designed with a short rear overhang, ensuring improved workability in restricted space, increased versatility, and better stability. The rear overhang also features cast-iron protectors, which significantly reduce damage to the machine in space restricted work sites.

Compact Machine Width The KX080-4 α 2’s narrow 2200 mm width makes it ideal for working in close conditions, and much easier to transport between job sites.

Further & Deeper

The KX080-4 α 2 can be equipped with a two-piece boom so you can take on tougher jobs in a wider range of sites. Furthermore, with it’s easy to control and smooth operation the extra versatility even under difficult working conditions minimises operator fatigue.

Extended reach

High dumping reach

Close digging capability

Efficient vertical digging

LONG-ARM_2pieces

LONG-ARM_2pieces_Sadou

LONG-ARM_2pieces_Sadouzu2

2-piece Boom's Dynamic Working Range The 2-piece boom offers a versatile working range so you can reach further, deeper, closer and anywhere in between. A. Expanded working range

LONG-ARM_2pieces_Sadouzu2

B. Impressive dumping range The 2-piece boom enables you to dump farther and higher, and offers a high bucket bottom position, making it smooth and easy to dump into Lorries without repositioning the excavator.

C. Efficiency in narrow spaces When space is restricted, the 2-piece boom manoeuvres easily to simplify vertical digging and efficiently make deep walls at 90° angles. And, it offers a compact front swivel radius to make turning and lifting operations in tight spaces even easier.

The versatile 2-piece boom offers a long reach and close retraction to make levelling large areas more efficient and productive. Plus, it’s easy to dig close to the machine, eliminating the need for constant repositioning. It’s particularly effective when working in narrow spaces.

Easy Boom Control The user-friendly design and location of the 2-piece boom pedal makes operation extremely simple. Located to the left of the driving pedals, the operator simply needs to flip the footpad, and depress the right side of the pedal to extend the boom, or the left side to retract it. This feature greatly simplifies the footwork necessary to smoothly operate the boom.

Smooth Simultaneous Operation Kubota’s 2-piece boom offers reliably smooth and fast performance. Its innovative hydraulic mechanism enables the operator to easily run the arm, boom, bucket, and swivel simultaneously, boosting work efficiency and increasing productivity.

LONG-ARM_2pieces_Sadouzu2

Kubota Original Anti-theft System Your KX080-4 α 2 is protected by Kubota’s industry-leading antitheft system. Only programmed keys will enable the engine to start up. Attempting to start with an un-programmed key will activate the alarm. Newly enhanced features include an alert to remind the operator to extract the key after operation, and an LED to alert potential thieves that the system is activated.

The red programming key programs the individual keys. The individual black keys start the engine.

Standard Equipment

Optional Equipment

• Swivel motor with disc brake • Overload warning buzzer • Kubota original anti-theft system • Anti-drop valve on the boom & arm (ISO 8643)

Undercarriage • 450 mm steel track (+ 50 kg) • 600 mm steel track (+ 100 kg) Working equipment • 1750 mm arm (- 22 kg) Safety system • Anti-drop valve unit on the dozer Others • Special paint upon request • OPG (Operator Protective Guard, Front Guard & Top Guard Level II , ISO 10262) • Beacon light • Additional weight for standard boom (+ 200 kg) • Additional weight for 2-piece boom (+ 260 kg) LONG-ARM_2pieces_Sadouzu

Engine/Fuel system • Double-element air filter • Automatic fuel bleed system • Auto idling system • Tank electric refuelling pump • Variable speed fan • Water separator Undercarriage • (450 mm) rubber track

Working equipment • Dozer blade with float function

• Auxiliary hydraulic circuit piping to the arm end • 2 working lights on cabin and 1 light on the boom • 2100 mm arm • Bracket and harness for 1st and 2nd beacon light Cabin • OPG (Operator Protective Guard, Top Guard Level I , ISO 10262) • ROPS (Roll-over Protective Structure, ISO 12117-2) • Weight-adjustable full suspension seat • Retractable seatbelt • Hydraulic pilot control levers with adjustable wrist rests • Travel levers with removable foot pedals • Air conditioning • Cabin heater for defrosting & demisting • Digital display panel • Front window power-assisted with gas damper • 12 V power source • Front window guard mounting points • 2 speakers and radio aerial • Location for radio • Cup holder • Emergency exit hammer Others • Tie down bracket on swivel frame • Tool box

• 1 × upper track roller (double flange type) • 5 single-flange track rollers on each track • 2-speed travel switch on dozer lever Hydraulic system • Pressure accumulator • Hydraulic pressure checking ports • Third line hydraulic return with lever • 2-pump load sensing system • Adjustable maximum oil flow on auxiliary hydraulic circuits (AUX1/AUX2) • Auxiliary switch (AUX1) on right control lever (proportional) • Auxiliary switch (AUX2) on left control lever (proportional) • 2-speed travel with auto-shift Safety system • LH control lever console • Travel motor with disc brake

Kubota Genuine and Approved Parts

for maximum performance, durability and safety

SPECIFICATIONS

WORKING RANGE

*with rubber shoe, JPN bucket and 2100 mm arm

8440 8365 0.25/0.21

kg m 3 kg

Operating weight* 2 Machine weight* 1

Bucket capacity, std. SAE/CECE Bucket width With side teeth Without side teeth Model

800 700 V3307-CR-TE5-BH-1 Water-cooled, diesel engine E-CDIS (with CRS and DPF)

mm mm

1460

Type

63.2/2000 46.5/2000 4 94 × 120 3331 9.8 450 2300 2200 × 500

PS/rpm kW/rpm

2490/2410

Engine

Output ISO9249 NET

2490/2410

Number of cylinders Bore × Stroke Displacement

mm cc rpm mm mm mm

Swivelling speed Rubber shoe width

Tumbler distance Dozer size (width × height)

Variable displacement pump

P1,P2 Flow rate Hydraulic pressure Arm Bucket

Hydraulic pumps

84.6 × 2 27.4 (280) 38.1 (3880) 65.2 (6650) 67/60 2050/2380 100 20.6 (210) 55.8 20.6 (210) 75 115 2.7 4.8 36.6 (0.373) 356 75 / 96 <2.5 / <2.5 4.40 / <2.5 <0.5 / <0.5 0.879 / <0.5

/min

Max. digging force Boom swing angle (left/right) MPa (kgf/cm 2 ) kN (kgf) kN (kgf) deg Minimum front swivel radius with boom swing (left/right)

1460

/min

Max. Flow rate Max. Hydraulic pressure

Auxiliary circuit (AUX1) Auxiliary circuit (AUX2)

2490/2410

MPa (kgf/cm 2 )

1460

4990/4950 6450/6410

Max. Flow rate Max. Hydraulic pressure MPa (kgf/cm 2 ) /min

1460

4990/4950 6450/6410

Hydraulic reservoir Fuel tank capacity Max. travelling speed Ground contact pressure Ground clearance Noise level Low High

km/h km/h kPa (kgf/cm 2 ) mm dB (A)

7170/6840 7330/7010

LpA / LwA (2000/14/EC)

1460 Unit:mm 2100 mm arm 1750 mm arm

7170/6840 7330/7010

m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS

Digging / Levelling Driving / Idling Digging / Levelling Driving / Idling

Hand arm system (ISO 5349-2:2001) Whole body (ISO 2631-1:1997)

4990/4950 6450/6410

Vibration* 3

Lift Point Radius

Lift Point

Lift Point Radius

* 1 With 176.6 kg standard bucket and fully served * 2 With 75 kg operator, 176.6 kg standard bucket and fully served * 3 These values are measured under specific conditions at maximum engine speed and can deviate, depending on the operating status.

Lift Point

7170/6840 7330/7010

LIFTING CAPACITY

Lift Point Height

kN (ton)

Lift Point Radius *With counter weight

Lift Point

Lifting point radius (Min) Over-front Blade Up

Lifting point radius (4m) Over-front Blade Up

Lifting point radius (5m) Over-front Blade Up

Lifting point radius (Max) Over-front Blade Up

Lift Point Height

Over-side

Blade Down

Blade Down 16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 26.0 (2.65) 24.5 (2.50) 27.4 (2.80) 26.0 (2.65) 28.4 (2.90) 27.9 (2.85) 27.0 (2.75) 27.4 (2.80)

Blade Down

1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm

16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 18.6 (1.90) 18.6 (1.90) 18.1 (1.85) 18.1 (1.85) 17.6 (1.80) 17.6 (1.80) 17.2 (1.75) 17.2 (1.75)

16.2 (1.65) 14.2 (1.45) 15.2 (1.55) 15.7 (1.60) 13.7 (1.40) 14.2 (1.45) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30) 12.7 (1.30)

Axis of Rotation

Lift Point Height

17.2 (1.75) 16.2 (1.65) 20.1 (2.05) 19.1 (1.95) 20.6 (2.10) 20.1 (2.05) 21.1 (2.15) 21.1 (2.15) 20.1 (2.05) 20.6 (2.10)

13.7 (1.40) 14.2 (1.45) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30) 13.2 (1.35) 12.7 (1.30) 12.7 (1.30) 12.7 (1.30) 12.3 (1.25)

10.8 (1.10) 10.8 (1.10) 10.3 (1.05) 10.3 (1.05) 9.8 (1.00) 9.8 (1.00) 9.3 (0.95) 9.3 (0.95) 9.3 (0.95) 9.3 (0.95)

17.0 (1.74) 15.8 (1.61)

10.7 (1.09) 9.3 (0.95)

8.2 (0.84) 7.5 (0.76)

1.5m

Axis of Rotation

* Working ranges are with Kubota standard bucket, without quick coupler. * Specifications are subject to change without notice for purpose of improvement.

37.2 (3.80) 28.4 (2.90)

-1m

LONG-ARM_S LONG-ARM_Sa LONG-ARM_

-3m

15.7 (1.60)

13.2 (1.35)

Lifting point radius (Min) Over-front Blade Up *Light weight version Please note: * The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87% of the hydraulic lifting capacity of the machine. * The excavator bucket, hook, sling and other lifting accessories are not included on this table. Over-side Blade Down Lifting point radius (4m) Over-front Blade Up Over-side Lifting point radius (5m) Over-front Blade Up Blade Down Lift Point Height

Lifting point radius (Max) Over-front Blade Up

Over-side

Blade Down 16.7 (1.70) 14.2 (1.45) 20.1 (2.05) 18.1 (1.85) 26.0 (2.65) 24.5 (2.50) 27.4 (2.80) 26.0 (2.65) 28.4 (2.90) 27.9 (2.85) 27.0 (2.75) 27.4 (2.80)

Blade Down

1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm

16.7 (1.70) 14.2 (1.45) 18.1 (1.85) 18.1 (1.85) 16.7 (1.70) 17.2 (1.75) 16.2 (1.65) 16.7 (1.70) 15.7 (1.60) 15.7 (1.60) 15.7 (1.60) 15.7 (1.60)

14.7 (1.50) 14.2 (1.45) 13.7 (1.40) 14.2 (1.45) 12.7 (1.30) 12.7 (1.30) 12.3 (1.25) 12.3 (1.25) 11.8 (1.20) 11.8 (1.20) 11.3 (1.15) 11.3 (1.15)

17.2 (1.75) 16.2 (1.65) 20.1 (2.05) 19.1 (1.95) 20.6 (2.10) 20.1 (2.05) 21.1 (2.15) 21.1 (2.15) 20.1 (2.05) 20.6 (2.10)

12.7 (1.30) 12.7 (1.30) 11.8 (1.20) 12.3 (1.25) 11.8 (1.20) 11.8 (1.20) 11.3 (1.15) 11.3 (1.15) 11.3 (1.15) 11.3 (1.15)

9.8 (1.00) 9.8 (1.00) 8.8 (0.90) 9.3 (0.95) 8.8 (0.90) 8.8 (0.90) 8.3 (0.85) 8.3 (0.85) 8.3 (0.85) 8.3 (0.85)

17.1 (1.74) 15.8 (1.61)

9.8 (1.00) 8.4 (0.86)

7.4 (0.75) 6.5 (0.67)

1.5m

37.2 (3.80) 28.4 (2.90)

35.8 (3.65) 28.4 (2.90)

-1m

-3m

15.7 (1.60)

11.8 (1.20)

2-PIECE BOOM VERSION

SPECIFICATIONS

WORKING RANGE

*with rubber shoe, JPN bucket and 2100 mm arm

kg m 3 kg

9145 9070 0.25/0.21

Operating weight* 2 Machine weight* 1

Bucket capacity, std. SAE/CECE Bucket width With side teeth Without side teeth Model

mm mm

800 700 V3307-CR-TE5-BH-1 Water-cooled, diesel engine E-CDIS (with CRS and DPF)

1500

2420/2230

Type

2420/2230

63.2/2000 46.5/2000 4 94 × 120 3331 9.8 450 2300 2200 × 500

PS/rpm kW/rpm

Engine

Output ISO9249 NET

Number of cylinders Bore × Stroke Displacement

mm cc rpm mm mm mm

Swivelling speed Rubber shoe width

Tumbler distance Dozer size (width × height)

Variable displacement pump

P1,P2 Flow rate Hydraulic pressure Arm Bucket

Hydraulic pumps

84.6 × 2 27.4 (280) 38.1 (3880) 65.2 (6650) 67/60 1990/2310 100 20.6 (210) 55.8 20.6 (210) 75 115 2.7 4.8 39.7 (0.405) 356 75 / 96 <2.5 / <2.5 4.40 / <2.5 <0.5 / <0.5 0.879 / <0.5

/min

1500

Max. digging force Boom swing angle (left/right) MPa (kgf/cm 2 ) kN (kgf) kN (kgf) deg Minimum front swivel radius with boom swing (left/right)

2420/2230

/min

Max. flow rate Max. hydraulic pressure

Auxiliary circuit (AUX1) Auxiliary circuit (AUX2)

MPa (kgf/cm 2 )

Max. flow rate Max. hydraulic pressure MPa (kgf/cm 2 ) /min

5440/5430 6940/6930

1500

5440/5430 6940/6930

1500

Hydraulic reservoir Fuel tank capacity Max. travelling speed Ground contact pressure Ground clearance Low High

km/h km/h kPa (kgf/cm 2 ) mm

1500 Unit:mm 2100 mm arm 1750 mm arm

Noise level

LpA / LwA (2000/14/EC)

dB (A) m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS

5440/5430 6940/6930

Digging / Levelling Driving / Idling Digging / Levelling Driving / Idling

Hand arm system (ISO 5349-2:2001) Whole body (ISO 2631-1:1997)

7670/7330 7820/7490

Vibration* 3

7670/7330 7820/7490

Lift Point

Lift Point Radius

Lift Point

Lift Point Radius

LIFTING CAPACITY

Lift Point

Lift Point Radius

kN (ton)

Lifting point radius (Min) Over-front

Lifting point radius (4m) Over-front

Lifting point radius (5m) Over-front

Lifting point radius (Max) Over-front

Lift Point Height

Over-side

Lift Point Height Blade Down Blade Up

Blade Down 23.0 (2.35)

Blade Up 23.0 (2.35)

Blade Down 19.6 (2.00) 18.1 (1.85) 23.5 (2.40) 22.1 (2.25) 27.4 (2.80) 26.5 (2.70) 27.4 (2.80) 27.0 (2.75) 26.0 (2.65) 26.5 (2.70) 22.5 (2.30) 24.0 (2.45) 6.9 (0.70) 11.3 (1.15)

Blade Up 19.6 (2.00) 18.1 (1.85) 21.1 (2.15) 21.6 (2.20) 19.1 (1.95) 19.1 (1.95) 18.6 (1.90) 18.6 (1.90) 18.1 (1.85) 18.1 (1.85) 18.1 (1.85) 18.1 (1.85) 6.9 (0.70) 11.3 (1.15)

Blade Down 17.6 (1.80) 16.7 (1.70) 18.6 (1.90) 18.1 (1.85) 20.1 (2.05) 20.1 (2.05) 20.6 (2.10) 20.1 (2.05) 19.6 (2.00) 20.1 (2.05) 17.2 (1.75) 18.1 (1.85)

Blade Up 15.2 (1.55) 15.7 (1.60) 14.7 (1.50) 14.7 (1.50) 13.7 (1.40) 13.7 (1.40) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 12.7 (1.30)

Lift Point Height

1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm 1750 Arm 2100 Arm

23.0 (2.35)

17.2 (1.75) 17.6 (1.80) 15.7 (1.60) 16.2 (1.65) 14.2 (1.45) 14.2 (1.45) 13.7 (1.40) 13.7 (1.40) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 13.2 (1.35) 6.9 (0.70) 11.3 (1.15)

11.8 (1.20) 12.3 (1.25) 11.3 (1.15) 11.3 (1.15) 10.3 (1.05) 10.3 (1.05) 10.3 (1.05) 10.3 (1.05) 9.8 (1.00) 9.8 (1.00) 9.8 (1.00) 9.3 (0.95)

Lift Point Height

14.7 (1.50) 13.8 (1.41)

9.6 (0.98) 9.5 (0.97)

7.3 (0.74) 6.9 (0.71)

Axis of Rotation

1.5m

Axis of Rotation

* Working ranges are with Kubota standard bucket, without quick coupler. * Specifications are subject to change without notice for purpose of improvement.

LONG-ARM_2pieces_S

27.9 (2.85) 22.5 (2.30)

20.6 (2.10) 22.5 (2.30)

-1m

LONG-ARM_2pieces_Sa LONG-ARM_2pieces_Sad

-3m

Please note: * The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87% of the hydraulic lifting capacity of the machine. * The excavator bucket, hook, sling and other lifting accessories are not included on this table.

Fluorinated greenhouse gases Air conditioner gas contains fluorinated greenhouse gases.

Industrial designation HFC-134a

Quantity (kg) 0.98

CO 2 equivalent (ton) 1.41

CAB model KX080-4 α 2

GWP 1430

(Global Warming Potential: GWP)

★ All images shown are for brochure purposes only. When operating the excavator, wear clothing and equipment in accordance to local legal and safety regulations.

SEATBELT

KUBOTA EUROPE S.A.S. 19 rue Jules Vercruysse Zone Industrielle - CS 50088 95101 Argenteuil Cedex France Téléphone : (33) 01 34 26 34 34 Télécopieur : (33) 01 34 26 34 99

KUBOTA (U.K.) LTD Dormer Road,Thame, Oxfordshire, OX9 3UN, U.K.

KUBOTA Baumaschinen GmbH Steinhauser Straße 100

D-66482 Zweibrücken Germany Telefon : (49) 0 6332 - 487 - 0 F a x : (49) 0 6332 - 487 - 101

Phone : 01844-268140 Fax :01844-216685

http://www.kubota-eu.com

0 2

Cat. No.8825-01-EU ’22-12D.

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12

kuk.kubota-eu.com