Model Machine weight *1 (cabin / canopy) Operating weight *2 (cabin / canopy) SPECIFICATIONS
WORKING RANGE
4120/3920 4070/3860
KX019-4 1780 / 1680 1855 / 1755 0.041 / 0.035 D902-E4
kg kg
m 3
Bucket capacity, std. SAE/CECE
Model Type
Water-cooled, diesel engine E-TVCS
Output ISO 14396 *3 Output ISO 9249 NET *3 Number of cylinders
16.0 (11.8) / 2300 15.8 (11.6) / 2300
PS (kW) / rpm PS (kW) / rpm
Engine
3 72 × 73.6 898 Diesel fuel conforming to EN 590 / HVO conforming to EN 15940
Bore × Stroke Displacement Fuel* 4
mm cc
1520/1480
1520/1480
mm mm mm mm mm mm mm deg
990 / 1300
Overall width
Overall height ( Cabin / Canopy ) Overall length Ground clearance Dozer size (width × height) Rubber shoe width Minimum front swivel radius Boom swing angle (left / right)
2350 / 2330 3860
Lift Point Radius
160
Dimensions
990 / 1300 × 230
Lift Point
230
1520 75 / 60 Variable displacement pump
Lift Point Height
P1, P2
1230 1590
17.3
Flow rate Hydraulic pressure
/min MPa (kgf/cm 2 )
21.6 (220)
1080
1230 1590
27.7 21.6 (220) 20.6 (210) 10.4 Gear pump 7.8 (790) 10.4 20.6 (210)
P3
3860/3710
Axis of Rotation
1080
Flow rate Hydraulic pressure
/min MPa (kgf/cm 2 ) /min MPa (kgf/cm 2 ) /min MPa (kgf/cm 2 )
Hydraulic System
3860/3710
Max. flow rate
Auxiliary (AUX1) Auxiliary (AUX2)
Max. hydraulic pressure Max. hydraulic pressure Max. flow rate
KX19-4_KBM_
4120/3920 4070/3860
Max. digging force
Arm Bucket
kN (kgf)
4120/3920 4070/3860
15.9 (1620)
kN (kgf)
Hydraulic reservoir (full)
28
2.2 / 4.0
Max. travelling speed (low / high)
km/h kPa (kgf/cm 2 ) rpm
1090 mm arm 1190 mm arm Unit: mm
27.4 (0.28) / 26.5 (0.27) 9.1
Ground contact pressure (cabin / canopy) Swivelling speed
21
Fuel tank capacity
LwA (2000/14/EC) LpA Digging Levelling Driving Idling
dB (A) dB (A)
93 78
Noise level
Hand arm system (ISO 5349-2:2001)
m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS m/s 2 RMS
<2.5 <2.5 <2.5 <2.5 <0.5 <0.5 <0.5 <0.5
Vibration* 5
Whole body (ISO 2631-1:1997)
Digging Levelling Driving Idling
Lift Point Radius
* 1 With 33.5 kg Kubota original bucket, 1190 mm arm, full tanks, rubber shoe. * 2 Machine weight + 75 kg operator. * 3 With diesel fuel comforming to EN590. * 4 Note that HVO has lower density than diesel fuels. * 5 These values are measured under specific conditions at maximum engine speed and can deviate, depending on the operating status.
Lift Point Radius
Lift Point
Lift Point
LIFTING CAPACITY
Lift Point Height
kN (t)
Cabin, rubber version
Lifting point radius (2.5m) Over-front
Lifting point radius (max) Over-front
Lift Point Height
Lift Point Height
Over-side
Over-side
Blade Down
1.9 (0.19) 2.4 (0.24) 2.9 (0.30) 3.1 (0.32) Blade Up
Blade Down
- - 2.0 (0.20) - Blade Up
- - 2.2 (0.22) -
- -
2.0m 1.5m 1.0m 0m
1.9 (0.19) 2.4 (0.24) 2.9 (0.30) 3.5 (0.36)
1.8 (0.18) 1.8 (0.18) 2.9 (0.30) 2.9 (0.30)
Axis of Rotation
Axis of Rotation * Working ranges are with Kubota original bucket, without quick coupler. * Specifications are subject to change without notice for purpose of improvement.
2.1 (0.21) 2.1 (0.21)
*The lifting capacities are based on ISO 10567 and do not exceed 75% of the static tilt load of the machine or 87% of the hydraulic lifting capacities of the machine. **The excavator bucket, hook, sling and other lifting accessories are not included on this table.
KX19-4_KBM_ SEATBELT KX19-4_KBM_201
★ All images shown are for brochure purposes only. When operating the excavator, wear clothing and equipment in accordance to local legal and safety regulations.
KUBOTA EUROPE S.A.S. 19 rue Jules Vercruysse Zone Industrielle - CS 50088 95101 Argenteuil Cedex France Téléphone : (33) 01 34 26 34 34 Télécopieur : (33) 01 34 26 34 99
KUBOTA Baumaschinen GmbH Steinhauser Straße 100
D-66482 Zweibrücken Germany Telefon : (49) 0 63 32 - 487 - 0 F a x : (49) 0 63 32 - 487 - 101
http://www.kubota-eu.com
0.5 2
Cat. No.8796A-01-EU ’24-12D.
Powered by FlippingBook