KC70H-4e UK Brochure

KC70H-4e UK

ELECTRIC TRACKED DUMPERS KC70H-4e KC70VSL-4e

Battery (V / Ah): 48 / 120

Machine weight (kg): KC70H-4e : 645 KC70VSL-4e : 740

Payload (kg): 700

BATTERY / MOTORS The KC70H-4e (front tip skip) and KC70VSL-4e (front tip skip, variable chassis and self loading device) are the first two electric machines of the Kubota range. They are based on the diesel and petrol versions with similar performances but integrate a battery instead of the engine in order to adapt to the on-going needs for machines without CO 2 emissions and and less noisy.

BATT ERY It has been developped thanks to the LiMnCo technology (lithium / manganese / cobalt). It works with a nominal voltage of 48V DC (direct current), which means the machines belong to the extra low voltage range. Designed to last 3000 charging cycles, it will not be necessary to replace the battery during the life of the machine. A Heating device is integrated in order to be able to recharge with cold temperatures outside.

C

C

MOTORS On both models, the travel motors are electric and not hydraulic anymore. It allows for better efficiency and a better working time. They have been developped thanks to the IPM technology (interior permanent magnet) and work with a tension of 48V and an intensity of 120Ah (AC – alternative current). They are IP67, which means they can be underwater without any risk. It is entirely possible to work in very humid conditions.

D

A

B

C. Inverters D. Document box

A. Battery B. Charger

BATTERY: 48V / 120 Ah

CHARGER The machines are always equiped with a charger. To use it, you need to unplug the battery from the rest of the machine, plug the charger to the machine and then link it the electricity network (impossible to charge the machine while it works). It is possible to charge the machine with tensions between 80V to 240V / 3kW (the battery will adjust itself). With a tension of 220V, it will take 3 hours to completely charge the battery, and 1 hour and a half to gain 80% of the total charge. Finally, the charger can be removed. The charger can also be removed for use on another machine by simply unscrewing 2 screws.

KC70H-4e KC70VSL-4e ELECTRIC TRACKED DUMPERS

FEATURES The KC70H-4e and KC70VSL-4e offer strong performances during the life of the machine. Unlike the electric travel motors, the control of the skip (KC70H-4e & KC70VSL-4e), of the self loading device and the extension of the tracks (only KC70VSL-4e) is done hydraulically. A pump and valve block are present inside the machines.

SK I P Skips of our tracked dumpers are well known for their durability and their loading volume. The design comes from our long experience into that type of machine.

Skip capacity: 0,28 m 3 Heaped capacity: 0,34 m 3 Payload: 700 kg

SE L F LOAD I NG DEV I CE The KC70VSL-4e has a self loading device in order to have more versatility and more autonomy on the jobsite. No need for another machine to load the dumper.

WORK I NG WI DTH Our two machines allow to work on very narrow jobsites, to go through doors to pick up material and then transport this material. This can avoid the need for conveyor systems on site.

KC70VSL - 4e

VAR I ABL E CHASS I S The VSL model is equiped with a variable chassis to adapt itself to the different conditions, retracted tracks to enter inside buildings (758 mm) or extended for more stability (1058 mm).

KC70H - 4e The width of the H model is even narrower with 750 mm.

758 mm

1058 mm

DASHBOARD The dashboard was developed with the operators comfort and safety in mind. The operator can hold the orange support bar with one hand whilst moving the machine with the other hand.

SENSOR The dead mans sensor cuts the power to the machine as soon as the operators hand is lifted.

SCRE EN The central screen

indicate the level of the battery, machine hours and some additional information on the status of the machine.

A. Support handle B. Horn C. Speed Low/high D. Self loading device (VSL model) E. Control of the skip F. Variable châssis (VSL model) G. Screen H. Command to move the machine with dead man sensor integrated

A

G

D E F

Kubota Genuine and Approved Parts

B

C

H

for maximum performance, durability and safety

 All images shown are for brochure purposes only. When operating the electric tracked dumper, wear clothing and equipment in accordance to local legal and safety regulations.

KC70VSL-4e

KC70H-4e

Model Dimensions and weight Max length (transport layout) Max width Machine height Max unloading height Machine weight* Performance Model Dimensions and weight Max length (transport layout) Max width Machine height Max unloading height Machine weight* Performance Dimensions and weight Max length (transport layout) ax width Machine height x unloading height chine weight* Performance x Drive speed x gradeability

mm mm mm mm kg mm mm mm mm kg mm mm mm km/h ° km/h ° m 3 m 3 kg kg k /h °

KC70VSL-4e 1966 758 / 1058 419 815 1966 758 / 1058 KC70VSL-4e 1966 758 / 1058

KC70H-4e KC70H-4e 1934 750

Dimensions and Performance

1358

1934 750 1934 750 450 29

1358 2 / 4 15 0,28 0,3 700 2 / 4 15 0,28 0,34 700 1358 2 / 4 15 0,28 0,34 700 180

419 815 419 815

450 729 450 729

Max Drive speed Max gradeability Skip capacity Heaped capacity Payload Undercarriage Max Drive speed Max gradeability Skip capacity Heaped capacity Payload Undercarriage Skip capacity H aped capacity Payload Undercarriage Crawler width Bottom rollers Idler Brake Crawler width Bottom rollers Idler Brake Crawler width Bottom rollers Idler Br k

m 3 m 3 kg m 3 m 3 kg

m

180 3 Spring-release with greased tensioner Negative, integrated in motors 180 3 Spring-release with greased tensioner Negative, integrated in motors Spring-release with greased tensioner Negative, integrated in motors

mm

mm

*With a 75 kg operator. Model Lithium-ion Battery Battery Model Lithium-ion Battery Model Lithium-ion Battery Charger Charger Charging time for 100% r ing time for 80% Electric motors Charging time for 100% Charging time for 80% Charging time for 100% Charging time for 80% Charger

KC70H-4e

KC70VSL-4e

48 120 3 80-240 180 90 48 120 3 80-240 180 90 48 120 3 80-240 180 90

V Ah kW V min min min min V Ah kW V V Ah kW min min

KC70H-4e

KC70VSL-4e

KC70H-4e

KC70VSL-4e

KC70H-4e

KC70VSL-4e

Model Number Type Technology Protection Model Number Type Technology Protection Model Number Type Technology Pr tection

KC70H-4e 2 48 IPM (Interior permanent magnet) IP67 KC70VSL-4e 2 48 IPM (Interior permanent magnet) IP67 2 48 IPM (Interior permanent magnet) IP67 KC70H-4e KC70VSL-4e KC70VSL - 4e

V AC

V AC

KC70H - 4e

Unit: mm

V AC

88°

1934

758

1966

45

2180

KUBOTA EUROPE S.A.S.

19, rue Jules Vercruysse Zone Industrielle - CS50088 95101 Argenteuil Cedex France Téléphone : (33) 01 34 26 34 34 Télécopieur : (33) 01 34 26 34 99

h t t p s : / / w w w . k u b o t a - e u . c o m

KTP.???.FR - 2021-10-04

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8

kuk.kubota-eu.com

Powered by